Статьи

Interrupting report execution, processing, and other lengthy actions

1C: Enterprise 7.7 /
Practical recommendations /
Other practical recommendations

Table of contents

Creating a report that takes a long time can be interrupted by the user by pressing the Esc key. In this case, the report will not be generated. This feature is used to abandon the formation of the report after the beginning of its formation.

After pressing the Esc key, the question is displayed: "Abort processing execution?". When you press buttons "Yes" report generation is terminated. When you click "No" report generation continues.

Note that the issue may not occur at the very moment the Esc key is pressed, but later. This is due to the fact that the system can only interrupt the generation of a report at certain stages.

Similarly, other long actions can be interrupted, for example, processing or document holding .

Depending on the specific processing device, that part of the actions that have already been completed before pressing the Esc key will be canceled or, on the contrary, recorded. If the document is interrupted, the entire process is canceled and the document returns to the state before the start. That is, the document can not be carried out in part.

Some system actions cannot be stopped by the Esc key, for example, the recording of a document or the setting of a period for calculating accounting totals cannot be stopped.


We are found: how to cancel report generation in 1c 8 2 , how to stop report generation in 1c 8 2 , how to stop processing in 1c 8 2, how to stop report generation in 1c, stop processing in 1c 8 2, how to cancel report generation in 1s, how to stop holding documents in 1s, cancel report generation in 1s, stop report generation in 1s, how to cancel processing in 1s 8 2


1C: Enterprise 7

After pressing the Esc key, the question is displayed: "Abort processing execution?

Новости