1. Using special siphons
2. Cooking improvised means
3. Method number 1
4. Method number 2
5. Method number 3
6. Method number 4
7. Good reasons
8. Expendable bubbles
9. Option for beginners
10. Precautionary measures
11. Familiar devices
12. For every taste

Many people in soviet times remember carbonated siphons that used small CO2 cans.

However, now they have almost disappeared from the sale. And the price for one cylinder is not very humane.

The following method allows you to prepare a soda at home, having the opportunity to replenish your carbon dioxide reserves in just ~ 150-200 rubles for refueling, grabbing for a long time. According to my calculations, this is enough to carbonate 200 liters of water.

First of all, you need a high pressure carbon dioxide cylinder.

It can be figured out from a carbon dioxide fire extinguisher, replacing the lever with a valve if necessary. You can be replaced in the same places where they are engaged in refilling cylinders. Reinforcement and repainting in black is also required.

I immediately purchased a finished carbon dioxide cylinder on Avito for 4.3 liters (1500 rubles). In the same place, I found an oxygen reducer (800r), which was successfully attached to the cylinder.

The valve for a carbon dioxide cylinder is better to use with a safety valve in order to avoid the possibility of an explosion of a cylinder when carbon dioxide overflows at the gas station and its further heating.

The hose, leading from the gearbox, used the usual plumbing. If you believe the inscriptions, can withstand a pressure of 10 bar. Between the gearbox and the hose, I put a check valve to prevent water from entering the gearbox. The thread at the output of the gearbox is very similar to plumbing 3/8 ", so the adapter at the local plumbing store bought an adapter 3/8" -> 1/2 "

At the end of the hose, I additionally put a mini ball valve in order not to lose the precious gas remaining in the hose and gearbox after carbonation.

As an adapter for connecting to the thread of standard PET bottles, a bottle cap with a cap and a fitting for plastic pipes are used.

I think everyone saw such drinking bottles:

The movable cap itself must be removed and the plastic core removed inside, and the tape itself must be wound around the tape for sealing.

The fitting we need is called: "Crimp connector, male thread, 16x1 / 2" mm ".

Therefore, we take nickel-plated and connect with the lid, tightening the nut.

Sparkling water (soda) or soda is known to mankind since the end of the XIX century. Previously, it was sold in special machines, but soon appeared on store shelves. Today, residents of developed countries can not imagine life without this drink, and manufacturers of carbonated drinks successfully use it, raising the price of their goods. Therefore, we will tell you how to make soda water at home and save your money.

Cooking homemade sparkling water is an easy and fairly quick process. All methods are based on the addition of carbon dioxide, which has neither taste nor smell. This gas is easily dissolved in water, making it sourish in taste.

Using special siphons

To prepare soda water, the easiest way is to use a special balloon or siphon with ready carbon dioxide. They are sold in any hardware stores. You can also make an order via the Internet.

To use the apparatus for water gassing in the home should be as follows:

1. Pour chilled water into the siphon.
2. Spin the carbon dioxide bottle.
3. Unscrew the valve and wait a few seconds for the carbon dioxide to flow into the siphon.
4. Twist the bottle and close the siphon so that gas does not go out.

Pouring soda from siphon into glasses is very convenient. To do this, just press the lever until it pours enough drink. If you compare the cost of purchased and homemade sparkling water, the latter will be more beneficial for the consumer.

Cooking improvised means

There are also many ways to carbonate water at home without using a siphon. All the necessary components can be found in the kitchen of any hostess.

The first way:

Using these ingredients, you can cook and large portions of soda. Plastic bottles or other tightly closed containers are acceptable as a vessel.

To improve the taste of the drink, you can add powdered sugar, syrup, honey and other natural additives. And its basis instead of water can be any juice and fruit drinks.

The second method is different from the previous one using vinegar instead of lemon juice. For cooking will need:

• 1 l of pure chilled water;
• 7 tablespoons 9% vinegar;
• 2 teaspoons of baking soda;
• meter tube;
• 2 bottles of dark plastic;
• 2 caps with holes with a diameter less than the diameter of the tube.

Cooking method:

1. Attach the edges of the tube to the two covers.
2. Fill one bottle with cold water.
3. Wrap the soda cloth and place it on the bottom of the second bottle.
4. Pour over the napkin with vinegar.
5. Tightly close the bottle caps to avoid carbon dioxide leakage.
6. Shake the bottle for 5-6 minutes until the gas evolves.
7. When the water is saturated with gas, close it with a simple lid and place in the refrigerator.

This is a very cheap way to get soda. But this water is not recommended to use often, as it contains residues of vinegar and bicarbonate acid, which, at high dosage, affect the mucous membranes irritatingly.

How to make soda water from ordinary

There are several completely uncomplicated ways. So, to make a drink you need to take mineral water and mix it with soda and citric acid.

Would need:

• teaspoon of soda;
• a piece of lemon, so that 2 teaspoons of lemon juice come out, or simple citric acid - half a spoon;
• pour soda into a glass and extinguish it with lemon juice;
• Those who love flavoring or simply want to sweeten soda can add cane or simple sugar. If you add caramelized sugar, you get a taste of cola. And if you pour in a little topping - it will come out no worse than any other sweet water from the store. If you put a lemon slice directly into the liquid, you get lemonade.

At home it is also easy to make soda in other ways.

Method number 1

This recipe is well suited for making large portions of soda water.

At first we mix everything for powder:

• baking soda - three incomplete teaspoons are enough;
• five teaspoons of powdered sugar, perhaps a little more or a little less, depending on your taste preferences;
• citric acid - 6 spoons (tea);
• All ingredients except powdered sugar are poured into a container, mixed and pounded. The mixture should be ground to near powder;
• we add icing sugar;
• mix the whole mixture again.

After the mixture is ready, pour it into the liquid.

Not less interesting taste of the drink prepared in house conditions, it will turn out if to fill in powder mix with juice or juice. Everyone probably remembers a huge amount of sweet soda in the store - now you have a great opportunity to cook something like this and in sufficient litra most yourself!

Method number 2

This method is for those who want to learn how to make a liter of soda water, adding vinegar to the composition.

You will need:

• 2 bottles, which can be closed with caps and connected with tubes;
• table vinegar - 100 ml;
• liter of ordinary water (it is possible and more, but then increase the remaining proportions);
• two small spoons of soda

When all the ingredients are prepared, pour liquid into the 1st container and lower the tube into it. Tightly close the lid. In the second bottle fall asleep soda and vinegar. Seal as the first bottle.

The tube for the transition of carbon dioxide set at the top. 5-7 minutes shake the liquid in the bottles.

Thus, carbon dioxide is released at home and saturates the liquid, making it carbonated. After preparation, it is desirable to cool the drink. Remember that the best such drink quenches thirst, if you drink cold.

Method number 3

An interesting way to make a carbonated drink at home will be the method using the already prepared carbon dioxide.

For this you will need:

• prepared carbon dioxide;
• mineral water;
• siphon.

• the siphon tank is filled with a liquid (preferably cooled - for effective carbonation) and tightly closed;
• carbon dioxide cylinder is connected to the charge;
• unscrew the valve. When all carbon dioxide has already fallen into the siphon, unscrew the cylinder and close;
• soda is ready!

Method number 4

At home, you can also make a carbonated drink by fermentation.

To do this, do the following:

1. Prepare;

• about 4 liters of chilled and a glass of warm water;
• half a cup of sugar;
• tablespoon of yeast. In the same case, if there is no bread yeast at hand, you can use the beer, but with a lower dosage - at the tip of a teaspoon;
• to taste you can pour a teaspoon of natural flavor.

It can be a concentrated liquid: juice, lemonade, etc., or herbs: tarragon or mint.

1. Add yeast and dissolve in warm water. To dissolve completely, leave them to infuse for 5-10 minutes;
2. In a container, mix the already dissolved yeast with sugar and flavor. Gradually pour in cold liquid and stir until sugar and other ingredients dissolve;
3. The resulting drink is bottled and close them;
4. Keep in a dark place for 5 days. At this time, the liquid wanders, so the lid should be periodically unscrewed and re-tightened;
5. After 5 days, move the bottles to the fridge;
6. Ready to eat!

For those who want to experiment and get the store taste of the drink, we recommend adding lemonade, uzvar, juice, or any kind of juice. You can achieve the effect and flavors.

However, not everyone can drink carbonated liquid. Therefore, it is rational to learn how to make non-carbonated water from carbonated?

There are 2 main ways to get non-carbonated water:

• shake and leave open in a warm place;
• to pass a stream of oxygen (pure nitrogen) through a liquid — this “blows out” carbonic acid.

To make both manipulations is absolutely not difficult. Carbonated water is natural and artificial. Let us say at once that naturally saturated, a very rare phenomenon.

But we all know how tasty! So try the above methods and choose your favorite!

(Visited 256 times, 2 visits today)

As you know, people began to carbonate water for a long time. Now it is customary to do it on a production scale. But in order to try to process the water yourself, you need to carefully understand all the intricacies of the process.

Good reasons

Hippocrates wrote about the benefits of water with gases. He spoke of its positive and even therapeutic effects on the body. Then no one tried to carbonate the water. People enjoyed the gifts of nature. They collected life-giving moisture with bubbles in bottles and took it to places where there were no similar sources. Everything would be fine, but on the way, over time, the water was exhaled, and it was extremely unpleasant to use it in this form. Since then, many have begun to wonder how water can be re-carbonated so that natural processes do not affect this factor. Scientists have found that there are two different ways to aerate a liquid: mechanical and chemical. The first is the direct saturation of the liquid fraction (ordinary fruit, mineral water or wine) with carbon dioxide. And the second one provides for the appearance of the same bubbles as a result of chemical reactions: fermentation (beer, kvass, cider and champagne) or neutralization (soda water). Each of them is interesting and has found its place in the life of a person.

Expendable bubbles

The first to learn to carbonate water was the English chemist Joseph Priestley. In 1767, he observed this phenomenon during beer fermentation in vats. A little later, the Swede Bergman invented his "saturator", which with a pump filled the water with carbon dioxide. But the idea of ​​industrial production of “boiling water” did not give peace to mankind. Using previous experience, in 1783, Jacob Schwepp constructed a special installation and was the first to install a new production on industrial rails. A little later, he began to use baking soda as a source component and became the progenitor of the future popular drink. Over time, he created a whole company and registered the trademark Schweppes. Often people ask the question: "Why do we even need to process water like that?" There are several reasons:

1) Carbonization neutralizes unpleasant odors and improves the taste of ordinary water. It is known that, for example, mineral water smells badly if you drink it warm and without bubbles.

2) In the warm season, the water thus treated quenches thirst better.

3) Carbon dioxide, which saturate the liquid, is an excellent preservative and allows you to keep any drink for a long time.

All this leads to the problem of even greater interest from not only ordinary people, but also the owners of large enterprises.

Option for beginners

Sometimes you feel like drinking, and there is no desire to go to the store. The question arises how to be in this case. How to make sparkling water without leaving home? The easiest way is suitable even for a child. It will take very little:

• free container (empty bottle or simple glass),
• baking soda,
• sugar,
• lemon acid,
• plain water

In order to make a drink, you must:

1. Take a little soda, pour lemon on it (or squeeze a few drops from a slice of lemon) and wait a bit. As a result, a quenching process will occur.
2. Now you need to mix all the ingredients. To do this, pour water into a glass, add a spoonful of sugar and stir it quickly. Then add ½ teaspoon of lemon and cooked before this slaked soda. It remains only to mix everything well.

This is the easiest option, remembering that, each person will be able to understand how to make sparkling water. In Soviet times, this method was often resorted to.

Precautionary measures

People are always interested in the details. But before you figure out how to carbonate water, you need to decide for yourself whether to drink such drinks at all. After all, this kind of liquid is not useful to everyone. There are categories of people for whom they are contraindicated. It:

1) Small children up to three years old digestive system which is not accustomed to such influences.

2) People suffering from various disorders in work gastrointestinal tract . This includes those whose doctors have discovered an ulcer, gastritis, hepatitis, pancreatitis, and other diseases. In them, carbon dioxide, getting inside, causes a sharp irritation of the mucous membrane and aggravates these already existing inflammatory processes.

3) A person who is prone to allergies or is overweight. This category of people should also refrain from consuming “dangerous” fluids.

Everyone else should think carefully before casting their eyes on bright labels in retail outlets or to understand the technological processes.

Familiar devices

In order to get a pleasant soft drink, it is not necessary to go to the store and stand in a queue. For this purpose, a special apparatus has long been invented. This is a water siphon. It is small, used at home, and large, which is often used in bars and cafes. In the Soviet Union, on the streets everywhere you could find automatic machines, which, after pressing a button, filled faceted glasses with a stream of life-giving moisture. Now such devices have gone into oblivion. There are only models designed for home use. They are arranged very simply. The siphon consists of a tank with a lever and a cylinder with carbon dioxide. The device is based on the laws of physics and chemistry. The three-fourths main vessel is filled with water. A cylinder is attached to it, which through the inlet valve fills the remaining space with carbon dioxide. And after pressing the lever, the liquid under pressure comes out. As a result, ordinary sparkling water appears in the glass. With the help of special syrups and flavors, you can give it the desired taste or make your favorite cocktail.

For every taste

Everyone can choose for himself the siphon for water, which he likes more. Many years have passed since the creation of the first apparatuses. During this time, experts have developed devices of various modifications. The most famous of them are:

1) Siphons of the Austrian company Isi and the Italian firm Paderno. They are similar to those that were produced 40-50 years ago. The only difference is that the case is made of stainless steel instead of ordinary glass. They keep the water temperature for a long time and are quite inexpensive. But in these siphons there is a major drawback - the danger. The gas cartridge is inserted manually, which, if misused, can result in serious injury.

2) Device type "SodaTronic". There is no water in it. This machine is designed to carbonate ready-made drinks. Inside the design contains a removable container with gas, which allows you to adjust the degree of saturation of the product with carbon dioxide.

3) SodaStream devices. In them, the water is poured into a special bottle, which is already included in the kit.

The choice of device in any case always depends on the desire of the buyer.

[ U ] [ OT ] [ ST ] [ OST ] [ TG ] [ GTU ] id Other Russian Ukrainian Belorussian Polish English Spanish Deutsch Turkish Bulgarian Czech Hungarian Estonian Armenian Kazakh Hebrew Georgian Serbian Croatian Lithuanian Slovak Slovenian Albanian Macedonian Latvian Kyrgyz Mongolian Portuguese Uzbek Korean Romanian Danish Greek Dutch Norwegian Swedish Italian French indonesian id arabic Hindi Bengal Chinese [Azerbaijani ] [bosnian bs ] [tajik ] [Latin ] [Vietnamese ] [Kannada kn ] [Finnish ] [Filipino ] [Irish ] [Icelandic ] [Scottish (Gaelic) gd ] [Japanese ] [Afrikaans ] [Amharic am ] [Catalan ] [ Cebuan ceb ] [Corsican ] [Welsh ] [Esperanto ] [Basque eu ] [Persian ] [Frisian ] [Galician ] [gujarati gu ] [house ] [Hawaiian ] [Hmong hmn ] [Creole (Haiti) ht ] [Igbo ig ] [Javanese ] [Khmer ] [Kurmanji ] [Luxembourg lb ] [Lao ] [Malagasy ] [Maori ] [Malayalam ml ] [Marathi mr ] [Malay ] [Maltese ] [Burmese my ] [Nepali ] [cheva ny ] [punjabi ] [Pashto ] [sindhi sd ] [Sinhala si ] [Samoan ] [shona sn ] [somali ] [sesoto st ] [Sudanese ] [Swahili ] [Tamil ] [Telugu te ] [Thai ] [urdu ] [khosa xh ] [yiddish yi ] [yoruba yo ] [zulu ] [ Tf ]
Notice : Undefined variable: url_text in /home/admin/web/server4.doubleclick.net.ru/public_html/scripts/api/method/TranslateText.php on line 936
No text
Container is damaged! Try to get the article again GetTextFromUrl.php , but this will delete all existing translations !!!